fbpx

512-292-1060 Call Now Get FREE Estimate Now
on Your Smartphone

Tag: maintenance

Jumper cable clamps attached to a red battery.
Knowing how to jump a car can save time and get you back on the road.

Jump starting a car is something all car owners have to do at some point in their lives. Whether we left our headlights on overnight, or just need a new battery, it’s important to know how to start your car when it dies.

The good news is that the jumping part is pretty easy. The hard part is (often) finding another car to jump your own. But once you do, just follow these easy steps.

What you need:

The stalled car, a car with a working battery, and jump cables

Directions:

Step 1: Make sure both cars are turned off: So the cables can reach, you want the engines of both cars near each other, but NOT touching.

Step 2: Connect one end of the red (positive) cable to the positive terminal (POS or +) on the car battery stalled. Do the same with the working battery.

Step 3: Connect the end of the black (negative) cable to the negative terminal (NEG or -) of the working battery.

Step 4: Connect the other end of the black (negative) cable to an unpainted metal surface on the car with the bad battery. Do not connect to the negative terminal of the car with the bad battery. This could result in the battery exploding.

Step 5: Start the car that has the good battery. Let the engine run for a few minutes before starting the car with the dead battery. If the car doesn’t start, let it run for a while longer. It may help to rev the engine of the good-battery car a bit to give it a boost.

Step 6: When it starts, remove the cables in reverse order and let the jumped car run for some time to give the battery a chance to properly recharge.

If your car does not start, you likely need a new battery.

A small portable battery charger with a cassette-sized battery and two small clamps.
Some portable battery jumpers are extremely compact.

For safety on the highway, we recommend you using a portable battery jumper. The process typically the same as mentioned above, except you won’t have to rely on another car for battery recharge power. This way, even if there is not another car available, or a safe place for another car to stop and help, you can get back on the road quickly.

For more helpful content, follow us on Facebook.

A bald, torn-up tire sits on a rusty vehicle.
Maintaining tires can prevent accidents on the road.

Tire quality is a serious safety issue. In 2015, there were nearly 70 traffic deaths in Texas related to tire issues. Maintaining tires and preventing a blowout will help drivers avoid serious collisions and a trip to the auto body shop.

Every car owner should take a few routine steps to check and maintain the quality of the tires on a vehicle.

Maintain air pressure

Expert recommend that you check your air pressure at least once a month, and always before a long road trip. If you own a vehicle that was made within the past ten to 15 years, it likely has tire monitors that alert the driver if a tire has low air pressure, but it is best to manually check the air pressure to see exactly how the air pressure is in the tire.

The recommended air pressure can be found on the tire, the inside of the door frame, or in your owner’s manual. Under-inflated tires can lead to tire damage, but over-inflated tires can lead to a blowout.

Measure tire tread

Good tread is necessary for traction and to maintain the durability of a tire. When tires look smooth, they need to be replaced.

A simple way to measure the tread on a tire is to insert a quarter with George Washington’s head facing down into the tread. If the top of his head shows, the tire is worn and should be replaced.

Having tires rotated regularly helps them wear more evenly and not as quickly.

Alignment and balance tires

Maintaining proper alignment and balance on a vehicle can prevent a tire from wearing excessively and prevent a blowout.

Call Us

512-292-1060